HWZBB

The only BlackBerry community you will want to be in Singapore. Singapore BlackBerry users, unite!

HWZBB - The only BlackBerry community you will want to be in Singapore. Singapore BlackBerry users, unite!

MicroSD – What Are They? What Should You Know?

the line of microsd cards of various capacityMemory modules have come a very long way, from a big SD card fitting just 32MB to now 128GB in that same form factor, the number of players or manufacturer’s per say has also increased. Today’s modern cards range from 8GB to 128GB, with most concentrating between 16GB and 64GB, they are without any doubt, useful to expand our device memory, in ways our other fruit device (Apple) is unable to. Not forgetting the fact that we can use it alongside with an adapter (in some newer models, you can even use microSD!) in a DSLR/camera and other media devices, the cards can play a pivotal role in the sharing of media. That said, not all cards are made equal, neither do they perform equally, so let us take a closer look at them.

MicroSD cards, as we all know are these tiny little cards, smaller than most of our fingernails. They come in varying colours and sepcification, and are predominantly broken down into 3 types:

  1. microSD
    This was the term used to first define the card. They are used on cards up to 2GB. These cards typically do not have any speed rating.
  2. microSDHC
    This was the second generation of cards, and the HC basically means High Capacity. Starting with these generation, class was assigned to it to determine its minimum performance, and even later, it even had a Ultra High Speed (UHS) in the third generation. SDHC is used to define cards between 4GB and 32GB.
  3. microSDXC
    This is the third, and fourth evolution of the microSD cards. Still looking identical to the predecessors, it brought with it the UHS and cards with capacity of 64GB and above (until now, its limited to 128GB).
    In the fourth generation, defined in recent months, it introduced UHS-II which brought some new changes to the cards physically to increase the speed.

Speed, as determined in the second generation, was broken down into various classes, guarantees speed for read and write to be of a certain speed:

  • Class 2
    Minimum 2MB/s for standard definition video recording
  • Class 4
    Minimum 4MB/s for High-definition video (HD) recording including Full HD (from 720p to 1080p/1080i)
  • Class 6
    Minimum 6MB/s, also for High-definition video (HD) recording including Full HD (from 720p to 1080p/1080i)
  • Class 10
    Minimum 10MB/s for Full HD (1080p) video recording and consecutive recording of HD stills (high-speed data bus)

Most commonly found on lower end cards for SDHC is the class 4 whilst many newer cards now feature class 10. SDXC cards are mostly (98%) class 10.

How to see the speed class of the card?
Well, each card will have the specification (microSD, microSDHC etc) as well as capacity and its rating on the card. The class number will be almost enclosed by a circle as seen below:
Speed classes of microSD cards

In revision 3, the UHS was introduced, to bring about faster speeds in the memory cards.

  • UHS-I Class 1
    This is the most common, prevalent rating found on most modern cards that are rated Class 10 because it also has a minimum performance requirement of 10MB/s. This is mainly used for Real-time broadcasts and large HD video files (UHS bus).
    This is denoted by either UHS-I (older cards) or a 1 in a U (new cards) as seen below:
    Source: Wikipedia, UHS-I Class 1 symbol
  • UHS-I Class 3
    This was also pretty recent, with the first iterations coming out in recent weeks. With a performance requirement of 30MB/s, it is rated for 4K video files (UHS bus).
    This is denoted by a 3 in a U (new cards) as seen below:
    UHS-I Class 3 Symbol
  • UHS-II
    There have been only implementations on the larger SD cards, until 16 April, when Toshiba released the worlds first UHS-II cards. Boasting speeds of up to 312MB/s, but minimum is still the 30MB/s since we can’t test it just yet. Also, it requires the hardware to support the new interface to support the higher speeds. This is implemented in revision 4.
    Look at the differences:

    All microSD cards sans MicroSD UHS-II

    The MicroSD/SD up to UHS-I

    UHS-II cards

    MicroSD/SD UHS-II interface

Finally, the last difference, is in the internals, or rather the type of memory used. There are 3 types of flash memory used in a MicroSD till date and they are:

  1. SLC
    Single Layer Cell
    (Highest performance, Lowest power consumption, Longest Lifespan, Most expensive)
  2. MLC
    Multi Layer Cell
    (Less endurance than SLC, Slightly higher power consumption, moderate lifespan, slightly cheaper)
  3. TLC
    Three or Triple Layer Cell
    (Least endurance, slowest read and write speeds than usual MLC, shortest lifespan, cheapest)

In most memory cards, manufacturers will be using the cheapest available TLC nand’s available for manufacturing, and some instances, MLC is utilized, but for the higher end cards only. SLC, however, have not been able to make it out to consumer grade cards, and have been typically reserved for industrial applications considering its high costs. In short, the lower the density, the better it is, however, it is impossible to differentiate a MLC, TLC or SLC cards from its look or testing unless it is specifically marketed or mentioned by the manufacturer.

Now, that is about the terminology you need to know, so let us see the benchmarking of the microSD’s, which are coming up next!

Your email address will not be published. Required fields are marked *

*

Please Verify That You Are Human * Time limit is exhausted. Please reload CAPTCHA.